BKD-70000-500 reactor

Product description:



Strictly follow the national technical company 35kV/60Mwar three-phase shunt reactor bidding document general technical specifications and the corresponding national standard GB/T 1094. 6 2011 (power transformer part 6 reactor) for design, production and testing:

1. The coil adopts internal screen continuous type, transposition wire;

2. The iron core adopts a three-core column yoke structure on both sides, and the air gap of the core column is a marble cushion;

3. The iron core adopts seven elastic pressing and stopping devices;

4. The body insulation is made of thin paper and small oil gap structure, with an all-round magnetic leakage shielding system;

5. Other special requirements.


Features

Strictly follow the national technical company 35kV/60Mwar three-phase shunt reactor bidding document general technical specifications and the corresponding national standard GB/T 1094. 6 2011 (power transformer part 6 reactor) for design, production and testing:

1. The coil adopts internal screen continuous type, transposition wire;

2. The iron core adopts a three-core column yoke structure on both sides, and the air gap of the core column is a marble cushion;

3. The iron core adopts seven elastic pressing and stopping devices;

4. The body insulation is made of thin paper and small oil gap structure, with an all-round magnetic leakage shielding system;

5. Other special requirements.


Performance
characteristics

1.The reactor has high voltage level and large capacity. In order to reduce vibration, this product is designed with a single core column on both sides of the yoke structure. To reduce the magnetic leakage area, the coil adopts a large reactance

2.The product uses a magnetic leakage shielding system, that is, magnetic shielding is provided     at the upper and lower ends of the winding, and the magnetic shielding of the box wall is provided on the front and rear side walls of the winding. At the same time, a thick iron yoke structure is used, and the key structural parts are made of high strength Magnetic stainless steel materials and other measures to prevent local overheating of structural parts due to magnetic leakage.

Certificate
certification
Performance
parameter